|
|
|
|
DTI has an extensive engineering and fabrication
capability. Our corporate headquarters facility encompasses 55,000 total square
feet under roof and another 30,000 square foot lay-down area.
We have certified welders in every category of welding
consistent with Industry Standards including SMAW, GTAW, GMAW, and FCAW.
|
|
|
We use proven techniques for pipe fitting and welding
to ensure full penetration welds with X-ray quality workmanship for both pipe
and structural welding. Our welding is approved on pipe up to 16" in diameter,
and structural up to 1" in thickness. We are qualified for Carbon Steel,
Stainless Steel, and Copper Nickel.
Our shop has produced fire protection skids 18 meters
in length, 4 meters wide, and weighing over 17 tons. We specialize in large
bladder tank and deluge valve skids, as well as enclosed fire pump packages
with fully insulated buildings.
|
|
Equipment List
|
|
|
|
We are capable of passing all NDT requirements
including X-ray, magnetic particle, dye penatrent, or simply a basic
hydrostatic test. Our hydrostatic testing is done in accordance with ASME B31.3
or the project specification which ever is more stringent. These tests are
typically witnessed by an objective third party inspector.
|
|
|
|
|
|
DT has a UL508 electrical panel shop where Fire &
Gas Control Panels are fabricated and assembled in an air conditioned
environment. DT utilizes high quality electrical work practices and has the
capability of provoding UL 508 labeling on made-to-order control panels. Free
standing or wall mount NEMA 1, 3, 4, 4X, 7, or 12 enclosures can be provided
for the desired controllers. We can also provide electrical equipment compliant
with non-US electrical standards such as CENELEC.
|
|
Our panel shop personnel are experienced with numerous
lines of electrical controls including Notifier, Siemens (Cerberus
Pyrotronics), Detector Electronics. Zellweger (Sieger), Spectrex, Scott
Bacharach, Draeger, Gastech, General Monitors, MSA, and Allen Bradley PLCs.
|
|